• Possible to install on the “Landing Door-Frame” and “next-to-the Landing door” with slim-line design

• 17 - 30 VDC Control Signal Supply Input

• 8 - 30 VAC/DC CPU Supply Input

• 4 safety circuit monitoring inputs, rated at 250VAC

• 5 NPN-transistor outputs, rated at 24VDC/100mA: For driving speed-controller and valve relays

• 3 NPN-transistor outputs, rated at 24VDC/100mA: For safety functions of “at floor and door-bridging”

• 1 selectable analogue speed-reference output in the range of 0..5V/±5V/0..10V/±10V/4-20mA

• Motor temperature monitoring and protection function via analogue PTC input

• TTL/HTL encoder inputs and 5/12V encoder supply output

• Inspection and electromechanic brake control signal inputs for car, shaft-pit and control panel each

• RESET switch control signal input for returning to normal operation after shaftpit inspection

• 128x64 graphic LCD display / Easy monitoring and change of li parameters and functions using a 7 push-button keypad

• Faulty-door contact monitoring and normal operation protection function • UCMP (Unintended Car Movement Protection) monitoring function

• Emergency electrical brake release and car over-speed control • Second-levelling-motor drive function for hydraulic lift

• Energy-saving monitoring and control functions

• Sha -copying function via motor or speed-regulator

• Levelling function with 2 floor-level-switches

• Firmware update, paramete and error list backup/copying using a USB flash memory stick via USB-A Host port • Firmware update, parameter and error list backup/copying, monitoring, and control of li controller simply connecting PC unit to USB-B Device port.